Publications and Reports: 2005 to 2006
Geotechnical and Geoenvironmental Engineering
M.J. Zenker, R.C. Borden, and M.A. Barlaz, "Biodegradation of Cyclic and Alkyl Ethers Using Attached Growth Reactors," Journal of Environmental Engineering (accepted for publication).
N.L. Lindow and R.C. Borden, "Anaerobic Bioremediation of Acid Mine Drainage using Emulsified Soybean Oil," Mine Water and the Environment 24:199-208, 2005.
K.M. Coulibaly, C. M. Long, and R. C. Borden, "Transport of Edible Oil Emulsions in Clayey-Sands: 1-D Column Results and Model Development," J. Engr. Hydrology, (accepted for publication, September 2005).
Y. Jung, K. M. Coulibaly, and R. C. Borden, "Transport of Edible Oil Emulsions in Clayey-Sands: 3-D Sandbox Results and Model Validation, J. Engr. Hydrology (accepted for publication, September 2005).
R.C. Borden and B.X. Rodriguez, "Evaluation of Slow Release Substrates for Anaerobic Bioremediation," Bioremediation Journal, (accepted for publication, January 2006).
M.D. Lee, M.T. Lieberman, W. Beckwith, R.C. Borden, P. Haas, E.S.K. Becvar, K. Dobson, and G.J. Sandlin, "Edible Oil Pilots to Enhance DNAPL Sequestration and Reductive Dechlorination," Paper B-10, In: B.C. Alleman and M.E. Kelley (Eds.), Proceedings of the Eighth International In Situ and On-Site Bioremediation Symposium, Baltimore, MD, June 2005, ISBN 1-57477-152-3, Battelle Press, Columbus, OH.
S. Knox, M.T. Lieberman, and R.C. Borden, "Monitored Natural Attenuation of Perchlorate in Groundwater," Paper A-20, in: B.C. Alleman and M.E. Kelley (Conference Chairs), In Situ and On-Site Bioremediation-2005, Proceedings of the Eighth International In Situ and On-Site Bioremediation Symposium, Baltimore, MD, June 6-9, 2005, ISBN 1-57477-152-3, Battelle Press, Columbus, OH.
W.J. Beckwith, R.C. Borden, C. Zawtocki, M.T. Lieberman, D. Koch, and I. May, "Anaerobic Bioremediation of a Piedmont Saprolite Source Area with EOS®," Paper D-18, in: B.C. Alleman and M.E. Kelley (Conference Chairs), In Situ and On-Site Bioremediation-2005, Proceedings of the Eighth International In Situ and On-Site Bioremediation Symposium, Baltimore, MD, June 6-9, 2005, ISBN 1-57477-152-3, Battelle Press, Columbus, OH.
T.O. Early, B.B. Looney, M. Heitkamp, R.C. Borden, G.R. Wein, T.H. Wiedemeier, D.W. Major, and C.H. Sink, "Enhancements to Natural Attenuation Processes: New Approaches to Plume Management," Paper N-10, in: B.C. Alleman and M.E. Kelley (Conference Chairs), In Situ and On-Site Bioremediation-2005, Proceedings of the Eighth International In Situ and On-Site Bioremediation Symposium, Baltimore, MD, June 6-9, 2005, ISBN 1-57477-152-3, Battelle Press, Columbus, OH.
J.R. Valdes, T.M. Evans, S.-H. Liang, and R. Yazdanifard, "Optimization of Sand-Rubber Mixtures for Filtration Control," of the XXIII Southeastern Conference on Theoretical and Applied Mechanics: Applications of Applied Mechanics in Infrastructure, Mayaguez, Puerto Rico, 2006.
J.M. Harris, A.L. Shafer, W. DeGrogg, G.R. Hater, M. Gabr, and M. A. Barlaz, "Shear Strength of Degraded Reconstituted Municipal Solid Waste," Geotechnical Testing Journal, 29, 2, 141-148, 2006.
K. Warren and M. Gabr, "Liquid Extraction Through Prefabricated Vertical Well Under Vacuum in Clay," ASTM Geotechnical Testing Journal, Vol 28(4): 328-335, July 2005.
J. Leng and M.A. Gabr, "Numerical Analysis of Stress-Deformation Response in Reinforced Unpaved Road Sections," Geosynthetics International Journal, Vol 12(2): 111-119, January 2005.
J.J. Bowders, M.A. Gabr, O.M. Collazos, and J.Quaranta "Prefabricated Vertical Wells for Enhanced In Situ Remediation," Geosynthetics Research and Development in Progress, Geotechnical Special Publication, n 130-142, pp 4141-4153, 2005.
M.J. Kowalsky, M.A. Gabr, B.R. Robinson, V. Suarez, and P. Robalino, "Pile Bent Design Criteria," Final Report to the North Carolina Department of Transportation, 2005-19, Raleigh, NC, 125 pp., August 2005.
S.J. Lee, J.P. Rust, H. Hamouda, Y.R. Kim, R.H. Borden, "Fatigue Cracking Resistance of Fiber-Reinforced Asphalt Concrete," Textile Research Journal, 75(2): 123-128, 2005.
S.M. Rahman and T. Hassan, "Advanced Cyclic Plasticity Models in Simulating Ratcheting Responses of Straight and Elbow Piping Components, and Notched Plates," ASME Pressure Vessels and Piping Division Conference, Denver, CO, July 17-21, 2005.
S.M. Rahman, T. Hassan, and S.R. Ranjithan, "Automated Parameter Determination of Advanced Cyclic Plasticity Models," Proceedings of ASME PVP2005 - Pressure Vessels and Piping Division Conference, Denver, CO, July 17-21, 2005.
©Department of Civil, Construction, and Environmental Engineering
