Publications and Reports: 2008 to 2009
Construction Engineering and Management
D.W. Johnston, "Design and Construction of Concrete Formwork," Chapter 7 in Concrete Construction Engineerng Handbook, edited by E. Nawy, CRC Press, 2nd edition, 2008.
D.W. Johnston, Development of a Construction Engineering Laboratory Course and Facility," Proceedings, ASCE-CI Construction Research Congress 2009, 10 pgs.
Y.Y. Ling, M. Liu, and Y.C. Woo, "Construction Fatalities in Singapore," International Journal of Project Management (in press), 2008.
M. Liu and G. Ballard, "Improving Labor Productivity thorugh Production," International Group for Lean Construction, July 2008, Manchester, UK.
P. Lewis, H.C. Frey, and W. Rasdorf, “Development and Use of Emissions Inventories for Construction Vehicles,” Transportation Research Record, National Research Council, Washington, DC, 2009 (in press).
H. Cai, and W. Rasdorf, "Accuracy Evaluation and Sensitivity Analysis of Predicting 3-D Road Centerline Length Using LIDAR and NED," Photogrammetric Engineering and Remote Sensing, American Society for Photgrammetry and Remote Sensing (June 2009). [190] (in press)
W.J. Rasdorf, J.E. Hummer, E.A. Harris, and W.E. Sitzabee, “IT Issues for the Management of High Quantity, Lower Cost Assets,” Journal of Computing in Civil Engineering, American Society of Civil Engineers, Vol. 23, No. 2, pp. 91-99 (March 2009 [198]
W. Sitzabee, W. Rasdorf, J. Hummer, and H. Devine, "Pavement Marking Data Model: A Case for Asset Management," Journal of Computing in Civil Engineering, American Society of Civil Engineers (accepted for publication, 2009).
P. Lewis, W. Rasdorf, H.C. Frey, S-H. Pang, K. Kim "Requirements and Incentives for Reducing Construction Vehicle Emissions and Comparison of Non-road Diesel Engine Emissions Sources," Journal of Construction Engineering and Management, American Society of Civil Engineers. [188] (accepted [COENG-75], 2009).
W. Sitzabee, J. Hummer, and W. Rasdorf, "Pavement Marking Degradation Modeling and Analysis," Journal of Infrastructure Systems, American Society of Civil Engineers (accepted for publication, 2009).
W.E. Sitzabee, J.E. Hummer, and W.J. Rasdorf, “Pavement Marking Degradation Modeling and Analysis,”(accepted in the Journal of Infrastructure Systems, 2009).
H.C. Frey, W. Rasdorf, K. Kim, S-H. Pang, and P. Lewis, "Comparison of Real World Emissions of Backhoes, Front-End Loaders, and Motor Graders for B20 Biodiesel Vs. Petroleum Diesel and for Selected Engine Tiers, Transportation Research Record: Journal of the Transportation Research Board, National Research Council, Washington, D.C., Number 2058, Pages 33-42 (2008). [195]
S. Abolhasani, H.C. Frey, K. Kim, W. Rasdorf, P. Lewis, and S-H, Pang, "Real-World In-Use Activity, Fuel Use, and Emissions for Nonroad Construction Vehicles: A Case Study for Excavators," Journal of the AWMA, Air and Waste Management Association, Volume 58, Pages 1033-1046 (August 2008). [204]
K. Kim, H.C. Frey, W. Rasdorf, S. Pang, and P. Lewis, “Characterization of Real-World Activity, Fuel Use, and Emissions for Selected Motor Graders Fueled with Petroleum Diesel and B20 Biodiesel,” Journal of the Air & Waste Management Association, 58(10):1274-1287 , 2008.
H.C. Frey, W. Rasdorf, K. Kim, S.-H. Pang, P. Lewis, and S. Abolhassani, "Life Cycle Inventory and Impact Analysis Framework for Nonroad Construction Vehicles and Equipment Based Upon In-Use Measurements," Technical Report, National Science Foundation, Washington, D.C., August 2008.
H.C. Frey, K. Kim, W. Rasdorf, S-H. Pang, and P. Lewis, "Characterization of Real-World Activity, Fuel Use, and Emissions for Selected Motor Graders Fueled with Petroleum Diesel and B20 Biodiesel," Journal of the AWMA, Air and Waste Management Association, Volume 58, Pages 1274-1287 (October 2008). [203]
B. Grasso, W. Rasdorf, and M. Bridgers, "The Nature and Extent of Domestic Construction Program Outsourcing," Journal of Construction Engineering and Management, American Society of Civil Engineers, Volume 134, Number 12, Pages 1002-1010 (December 2008). [192]
W. Rasdorf, G. Zhang, and J.E. Hummer, "The Impact of Directionality on Paint Pavement Marking Retroreflectivity," Journal of Public Works Management and Policy, American Public Works Association, Volume 13, Number 3, Pages 265-277 (January 2009). [207]
W. Rasdorf, J.E. Hummer, E. Harris, and W. Sitzabee, "IT Issues for the Management of High Quantity, Low Cost Assets," Journal of Computing in Civil Engineering, American Society of Civil Engineers, Volume 23, Number 2, Pages 91-99 (March 2009). [198]
V.P. Immaneni, J.E. Hummer, W.J. Rasdorf, C. Yeom, and E.A. Harris, “Synthesis of Sign Deterioration Rates Across the U.S.,”Journal of Transportation Engineering, American Society of Civil Engineers, Vol. 135, No. 3, pp. 94-103 (March 2009) [172]
A. Pradhan and W. Rasdorf, "GIS and LiDAR Use for Identification of Potential Road Hazard Locations," Proceedings of the International Workshop on Computing in Civil Engineering, William O'Brien and Carlos H. Caldas, editors, American Society of Civil Engineers, Austin, TX, July 2009.
M. Dawood, M.N. Guddati, and S. Rizkalla, "Effective Splices for a CFRP Strengthening System for Steel Bridges and Structures," Transportation Research Record (accepted for publication), 2009.
S. Rizkalla, P. Zia, A. Mirmiran, H. Russell, and R. Mast, "Proposed Revisions to Extend Bridge Design Specification to Concrete Compressive Strength up to 134 MPa," Transportation Research Record (accepted for publication) 2009.
W. Choi, S. Rizkalla, P. Zia, and A. Mirmiran, “Behavior and Design of High-Strength Prestressed Concrete Girder,” PCI Journal (in press), January 2008.
B. Lanier, D. Schnerch, and S. Rizkalla, “Proposed Design Guidelines for Strengthening of Steel Monopoles with High Modulus CFRP Materials,” Thin-Walled Structures, Elsevier (in press), 2009.
G. Jiang, M. Dawood, K. Peters, and S. Rizkalla, “Self Monitoring Fiber Reinforced Polymer Strengthening System for Civil Engineering Infrastructure,” Proceedings of Smart Structure and Materials of Non-destructive Evaluation and Health Monitoring 2008, San Diego, CA, March 9-13, 2008.
W. Choi, H.C. Mertol, S. Rizkalla, and P. Zia, “Flexural Design of Prestressed High-strength Concrete Girders,” Proceedings of the Fourth International Conference on Bridge Maintenance, Safety and Management (IABMAS '08), Seoul, Korea, July 13-17, 2008.
M. Dawood, M.N. Guddati, and S. Rizkalla, "Bond Behavior and Durability of CFRP Strengthening System for Steel Structures," 4th International Conference on FRP Composites in Civil Engineering, Zurich, July 2008.
B. Frankl, G. Lucier, S. Rizkalla, G. Blaszak, and T. Harmon, “Behavior of Insulated Prestressed Concrete Sandwich Panels Reinforced with FRP Grid,” 4th International COnference on FRP Composites in Civil Engineering (CICE 2008), Zurich, Switzerland, July 22-24, 2008.
M. Derias, R. El-Hacha, and S. Rizkalla, “Durability of NSM FRP Flexural Strengthening Systems Subjected to Severe Environmental and Loading Conditions," Fifth International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-V), Winnipeg, Manitoba, Canada, September 22-24, 2008.
M. Dawood, M.N. Guddati, and S. Rizkalla, "Performance of an Externally Bonded CFRP System for Strengthening System for Steel Structures," 5th International Conference on Advanced Composite Materials in Bridges and Structures, Winnipeg, Canada, September 2008.
E. Shehata, F. Fam, S. Rizkalla, and A. Mufti, “Innovations in GFRP Bridge Decks,” Proceedings of the Fifth International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-V), Winnipeg, Manitoba, Canada, September 22-24, 2008, CD-ROM paper No. 104.
J. Soliman, T. Hassan, A. Abdel Fayad, and S. Rizkalla, “Bond Characteristics of Micro-Composite Multi Structural Formable Steel Reinforcement,”Proceedings of the Fifth International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-V), Winnipeg, Manitoba, Canada, September 22-24, 2008.
R. Mast, M. Dawood, S. Rizkalla, and P. Zia, “Flexural Design of Concrete Beams Reinforced with High-Strength Steel Reinforcing Bars,” ACI Structural Journal, Volume 105l, Number 4, , pp 570-577, September-October 2008.
H.C Mertol, S. Rizkalla, P. Zia, and A. Mirmiran, “Characteristics of Compressive Stress Distribution in High-Strength Concrete,” ACI Structural Journal, Volume 4, pp. 628-635, September-October 2008.
S. Rizkalla, M. Sumpter, and P. Zia, “Behavior of High-Performance Steel as Shear Reinforcement for Concrete Beams,” ACI Structural Journal, Volume 106, Number 2, pp. 171-177, March/April 2009.
O. Rosenboom, C. Walter, and S. Rizkalla,“Strengthening of Prestressed Concrete Girders with Composites: Installation, Design and Inspection,” Construction and Building Materials, Volume 23, Number 4, pp. 1495-1507, April 2009.
A. Mosavi, T. Wang, H. Wang, R. Seracino, and S. Rizkalla, “Damage Identification for Bridges Using Frequency and Time Domain Data,” Proceedings of the IMAC XXVII A Conference and Exposition on Structural Dynamics, Orlando, FL, February 9-12, 2009.
©Department of Civil, Construction, and Environmental Engineering
