Publications and Reports: 2008 to 2009
Geotechnical and Geoenvironmental Engineering
H.S. Rifai, R.C. Borden, C. J. Newell, and P. B. Bedient, "Modeling Dissolved Chlorinated Solvents in Groundwater and their Remediation, In Situ Remediation of Dissolved Chlorinated Solvents in Groundwater," Ed. H.F. Stroo and C.H. Ward, Springer, New York, NY, pp. (in press).
P.B. Hatzinger, J. K. Böhlke, N.C. Sturchio, B. Gu, L.J. Heraty, and R.C. Borden, "Fractionation of Stable Isotopes in Perchlorate and Nitrate during in situ Biodegradation in a Sandy Aquifer," Environmental Chemistry, 2009 (accepted for publication).
A.M. Weispfenning and R.C. Borden, "A Design Tool for Planning Emulsified Oil Injection Systems," Remediation Journal, 19(4):33-47, DOI: 10.1002/rem. 20180, 2008.
R.C. Borden and M. T. Lieberman, "Passive Bioremediation of Perchlorate using Emulsified Edible Oils, In Situ Bioremediation of Perchlorate in Groundwater, Ed. H.F. Stroo and C.H. Ward, Springer, New York, NY, pp. 155-172, 2008.
A.M. Borden, M. T. Lieberman, W. J. Beckwith, and R.C. Borden, "Using Emulsified Oil Substrate (EOS) for In Situ Bioremediatwion of a Trichloroethene Source Area in Residual Soils," Proceeding of 1st International Conference on Hazardous Waste Management, Chania–Crete, Greece, 2008.
M. T. Lieberman, R.C. Borden, W. J. Beckwith, A. M. Borden, "Protocol for Enhanced In Situ Bioremediation of Chlorinated Solvents and Perchlorate using Emulsified Oil Substrate," Proceeding of 1st International Conference on Hazardous Waste Management, Chania–Crete, Greece, 2008.
R.C. Borden, M. Clayton, A.M. Weispfenning, T. Simpkin, and M.T. Lieberman, Technical Report - "Design Tool for Planning Emulsified Oil Injection Systems," Environmental Science and Technology Certification Program, Washingtn, DC, 2008.
M.H. Clayton and R.C. Borden, "Numerical Modeling of Emulsified Oil Distribution in Heterogeneous Aquifers," Ground Water, 47(2): 246–258, 2009.
W.S. Kim and R.H. Borden, “Numerical Modeling of a MSE Wall under Water Infiltration using Unsaturated Soil Properties,” XIV International Conference on Soil Mechanics and Foundation Engineering, Cairo, Egypt, August 2009 (in press).
J. Ahn, B.M. Cote, B. Robinson, M.A. Gabr, and R.H. Borden, "Inverse Analysis of Plate Load Tests to Assess Subgrade Resilient Modulus,” Transportation Research Record, TRB Paper Number: 09-1351 (in press).
W.S. Kim and R.H. Borden, “Wetting Induced Changes in Elastic Modulus of a Compacted Low Plasticity Clay,” The International Foundations Congress and Equipment Expo ‘09 (IFCEE09), Geo Institute of ASCE, Orlando, March 15-19 (W.S. Kim and R.H. Borden) (in press).
W.S. Kim and R.H. Borden, "Lessons Learned in Use of Instrumented Soldier Pile Wall for Inverse Analysis of Material Properties," Proceedings of the 7th International Symposium on Field Measurements in Geomechanics, Geotechnical SP 175, Geo Institute of ASCE, Boston, Sept. 24-27, 2008.
R.H. Borden and G. Sullivan, "Design and Implementation of an Instrumentation Program to Minimize Risk of Damage to a High-Voltage Electrical Ductbank, "Proceedings of the 7th International Symposium on Field Measurements in Geomechanics, Geotechnical SP 175, Geo Institute of ASCE, Boston, Sept. 24-27, 2008.
W. A. Smith and R.H. Borden, "Jet Grouting Induced Changes in Soldier Pile Loads and Pile Deflections," Proceedings of the 7th International Symposium on Field Measurements in Geomechanics, Geotechnical SP 175, Geo Institute of ASCE , Boston, Sept. 24-27, 2008.
X. Zhao and T.M. Evans, "Discrete Simulations of Laboratory Loading Conditions," ASCE International Journal of Geomechanics, 2009 (in press).
T.M. Evans, S. Chall, X. Zhao, and T-M. Rhyne, "Visualization and Analysis of Microstructure in Three-Dimensional Discrete Numerical Models," ASCE Journal of Computing in Civil Engineering, 2009 (in press).
J.R. Valdes and T.M. Evans, "Sand-Rubber Mixtures: Experiments and Numerical Simulations," Canadian Geotechnical Journal 45(4):pp. 588-595, 2008.
T.M. Evans and X. Zhao, "A Discrete Numerical Study of the Effect of Loading Conditions on Granular Material Response," 4th International Symposium on Deformation Characteristics of Geomaterials, Atlanta, GA, September 22-24, 2008, 7 pp.
T.M. Evans, H. Majarrad, C.N. Cunningham, and A.A. Tayebali, "Grain Size Distribution Effects in 2D Discrete Numerical Experiments," in a GSP from the 2009 International Foundation Congress & Equipment Expo, Orlando, FL, 2009.
M. S. Hossain and M. A. Gabr, “The E+ffect of Shredding and Test Apparatus size on Compressibility and Strength Parameters of Degraded Municipal Solid Waste Management,” International Journal of Integrated Waste Management, Science and Technology “Waste Management, (in press, to be published August 2009).
J. Ahn, B. Cote, B. Robinson, M.A. Gabr, and R.H. Borden, “Inverse Analysis of Plate Load Tests to Assess Subgrade Resilient Modulus" Journal of Transportation Research Board (in press, to be published July 2009).
M.A. Gabr, R.H. Borden, A.W. Smith, and R.L. Denton, D.B. Eggleston, and S.W. Broome, “Sustainability In Coastal Construction: Characterization and Ecological Impact of Jetting-Induced Disturbance Zones,” Japan – Egypt Joint Symposium, New Horizons in Geotechnical and Geoenvironmental Engineering, Tanta University, Egypt, September 2008, 14 pp.
A.L. Vidot-Vega , B. Possiel, B. Robinson, M.J. Kowalsky, and M.A. Gabr, " Evaluation of Rotational Stiffness of Elastomeric Bearing Pad-Anchor Bolt Connections on Deep Foundation Bents,” ASCE Journal of Bridge Engineering, Vol. 14, June 2009.
M.B.C. Ulker, M.S. Rahman, and D.S. Jeng, “Wave-induced Response of Seabed: Different Formulations and Their Applicability”, Applied Ocean Research [accepted for publication], 2009.
M.B.C. Ulker and M.S. Rahman, “Response of Saturated Porous Media: Different Formulations and Their Applicability,” International Journal of Analytical and Numerical Methods in Geomechanics, [In Press, DOI:10, 1002/nag.739], 2009.
M.B.C. Ulker, M.S. Rahman, and M.N, Guddati, “Wave-induced Dynamic Response of Rubble Mound and Seabed under a Breakwater,” 1st Int. Symp. on Computational Geomechanics (GeoCom1), Juan-les-Pins, Coted’ Azur, France, April 29- May 1, 2009.
M.B.C. Ulker, M.S. Rahman, and M.N., Guddati, “Breaking Wave-induced Dynamic Response of Rubble Mound and Seabed under a Caisson Breakwater”, Proc. 28th Int. Conf. of Offshore Mech. and Arctic Engg (OMAE), Honolulu, Hawai, USA, May 31-June 05, 2009.
M.S. Rahman, T. Hassan, and E. Corona, “Evaluation of Cyclic Plasticity Models in Ratcheting Simulation of Straight Pipes under Cyclic Bending and Steady Internal Pressure,” International Journal of Plasticity, 24, 1756-1791, 2008.
©Department of Civil, Construction, and Environmental Engineering
